25 October 2022

Mexican Town upgrade

 Well I managed to get my Church based coated after adding some sand and pva for effect and to cover the bad printing issue.  Most of the printing issues are now resolved after much cursing. I also printed off a bell which will go in once I airbrush on some paint.

Mexican church

With a plan to purchase a new FDM printer in the near future, I had to upgrade my gaming room to accommodate, so I built another box cupboard for my current CR20, with a nice space onto for the new printer.

It came out pretty good, well for my humble very very average carpentry skills, I think its works well. Does the job well and is rock solid, having made it from18mm plywood

I'm currently looking at purchasing an Ender 5 Plus, which will enable some much larger prints and will assist with my plan of make a huge Mexican cantina ...A.K.A.... the local watering hole, where plenty of bar room brawling will take place.

21 October 2022

Mexican Town

 I got a little sidetracked on getting my old CR20 3d printer tuned after having a few issue, but have finally got it printing awesome again. And then of course the new parts I ordered for it turn up today ... oh well, perfect for a long weekend project.

I have managed to get the church printed and some paint on the buildings. The church was a bit of a pain as I had all sorts of issues with printing to the max of my printer bed, but nothing some filler, sand and paint won't hide. Overall I'm pretty happy with the outcome especially since I design it all... and I'm no 3D designer.

12 October 2022

Mexican Adobe buildings

After playing a couple of awesome games at the club over the weekend I decided to make some buildings for a Mexican town. Starting with an Adobe style building, taking a few notes from what sarissa-precision.com have done and designing them flat pack style so they are easy to 3d print. Using Tinkercad online to design them, I still need a few tweaks to the sizes to allow for the filament expansion as the parts are too tight, but overall pretty happy with the first run.

At 150mm x 100mm, its only a small building, but making deeper sides is simple, so I'll be able to expand out to two or three different building without too much work. The plan is to also make a two story, one with exterior stairs and a large saloon. And of course, I'll have to have a church.

08 October 2022

A True Legend of a Game

 A long long time ago ... all the way back in 2011 I got my first Legends of the Wild West gang from Black Scorpion Miniatures and put together my Cow Girls Posse. So some 11 years later I get my third gang from them (The Mexicans) and we are still play it.  

So this Club day a few of us busted out some games. We played 2 large games with 3 Posse's per side. The carnage was epic, the Heros were magnificent and the dice were dice. A great day gaming.

07 October 2022

Buildings for Legends of the Wild West

 Still a work in progress, but my first three buildings for my Wild West town are almost finished, need a bit more paint and a sign or two. I'll still use them in tomorrow games at the club.

Buildings for Legends of the Wild West

They are all 3D printed from files I found on Thingiverse - Digital Designs for Physical Objects

Buildings for Legends of the Wild West

06 October 2022

Legends of the Old West: Mexican Bandios

 I finally got around to making some cards for my for Legends of the Old West. They turned out pretty good and I'm rather stoked with them. The minis are of course Black Scorpion models which i recently finished using Army Painter speed paints. Unfortunately Black Scorpion don't have any Peons with just knifes or hand weapons, as I'd love to field a huge 15 strong gang of knife welding maniac's. Really looking forward to Saturdays club day,  where I'll get to use these guys for the first time. 

01 October 2022

Legends of the Wild West

After having just finished my Mexican gang I decided it was about time to make some wild west terrain. 
Starting with some Gallows which I've 3d printed, I'm now onto printing off a couple of small buildings on my FDM printer, while I continue to print furniture for my 1930s buildings

28 September 2022


How time flys when you're busy.Thought I'd attempt to get back into posting to help keep me on track with all my projects.. think they are starting to get out of hand.

First up I have resurrected my early 1930s buildings and started fitting out the interiors now that I have a resin printer
Im still working on the guys to get them to play The Legends of the Old West variant

18 January 2022

Blood Bowl

 Well this year is starting out slow, which is actually great, instead of the madness of last year.  Got a little distracted with the madness of work and Christmas so haven't been posting at all.

Christmas was low key and I got to choose my present from my wife which I went for Blood Bowl. Having never played it, I thought it looked like a good little side track for my printer projects.

Well that little side track has turned into a mammoth one. Found Kraken Studios and there very cool blood bowl pitches..... some dollars later I'm printing out a full pitch, stands, crowds and loads of other bits.

Blood Bowl pitch

It's take about 220 hours of printing so far, and I'm almost done. I'm planning of gluing the tiles all down to some 7mm plywood that I have lying around. All to sizes that will fit into my storage and transport boxes.

Blood Bowl pitch

 All the ground tiles were printing on my FDM printer and alot of the scenery .. most of it is done in resin. Got a load more painting to do now but she's starting to look the part. So I should be able to play my first game sometime int eh next month or two.